Simpson PGT2-R - Pipe Grip Tie - Galvanized

Pipe Grip Ties attach wood fence rails to metal fence posts,
eliminating rotted and failed wood posts. The PGT is suitable
for standard applications as well as corners and splices.
The PGTIC2Z-R is an interior corner pipe grip tie.
The PGT1.5Z-R is for 1 1⁄2" pipe (1 7⁄8" outside diameter),
and the PGT2Z-R for 2" pipe (2 3⁄8" outside diameter).
MATERIAL: 12 gauge
FINISH: ZMAX® coating, also available in G90.
INSTALLATION: Use all specified fasteners. See General Notes.
PGTIC2Z-R to Post Install two set screws (supplied)
with 3⁄8 socket in predrilled holes.
PGTIC2Z-R to Rails Use Simpson Strong-Tie®
Strong-Drive® 1⁄4"x1 1⁄2" SDS wood screws (not supplied).
Install on vertical pipes, offsetting corners
to allow for the correct rail alignment.
Use 3 to 4 PGTs per pipe; line up to stringline.
Fasten PGT with 1⁄4" hex head bolt (supplied).
PGT attaches to rails with four Simpson Strong-Tie
SDS 1⁄4"x1 1⁄2" HDG wood screws (not supplied).
See page 28 for SDS screw information.
1⁄4" lag bolts may be used. Follow the code
requirements for predrilling.
Nail fence boards to rails.
Field bend PGT flanges to fit corner and angled
conditions (bend one time only).