Simpson Strong-Tie HL76PC The Rustic Collection - heavy angles with optional gussets

The Rustic Collection

It's amazing what a simple notch can communicate. In
a connector, notched detailing creates the look and feel of
a rugged cabin or backcountry ski lodge. Used with heavy
timbers and beams, these connectors have an antique quality
that's immediately reminiscent of the simplicity and strength
historically associated with the American Frontier.

1. Use 0.85 times table load for Hem Fir.

2. Parts should be centered on the face of the member to which they are attached. Wood members for the '3' and '5' series must have a minimum width and thickness of 3 1/2" for table loads to apply. Wood members for the '4' and '7' series must have a minimum width and thickness of 5 1/8" for table loads to apply.

3. For uplift loads, parts must be used in pairs. Lag bolts of equal diameter (minimum 5" long) may be substituted for machine bolts into beam with no reduction in load.

4. Gussets may be added to HL models when L > 5". Specify G after numbers in model number as in HL46GPC.

 
Note: Published loads assume Douglas Fir-Larch lumber. For 133/160 columns allowable loads have been increased 33% and 66% for earthquake and wind loading.
No further increase allowed; reduce where other loads govern. See the Simpson Strong-Tie Wood Construction Connectors catalog for additional information on these products.