Nice – Apollo 1724i Single swing gate operator – 24VDC – Non UL325 Compliant

Description

24 VDC Actuator for swing gates up to 400 lbs weight and 14 ft length. Recommended for residential applications. Great innovative functions with the 1050 control board

Includes the following:
(1) – MB1050i and 512-1
(1) – Battery Backup included (2-7aH batteries)
(1) – Nice OXI/A Receiver and ABF/A Antenna Kit included.
Non UL325 Compliant

Versatile: available in both 1724 single version and 1824 dual gate version, including an additional actuator with 38 ft. cable working with the 1050 circuit board.
Powered by: AC power supply connected to a 120 VAC power source.
Reliable in any condition: in the event of electrical power outage, two fully charged batteries will provide up to 200 cycles* on a basic system before requiring a recharge. *Amount of cycles depends on consumption of attached accessories and duration of power outage.
Quality and durability: this new generation model is resistant to environmental conditions: The control box is made from polycarbonate while the actuator housing is made up of two tough aluminum shells with polyester paint finish. This system has a sleek look and the practical connection compartment allows for easy installation and maintenance. The T5 series actuators have an external quick release with key, that allows for manual operation.

Easy to install
24VDC Motor
External Manual Release
LCD Display
Plug-in receiver: up to 1,000 rolling-code transmitters
7 day programmable event timer
Innovative Obstacle Detection System
Surge Protection
Programmable Inputs and Outputs
Advanced Dual Gate Management
Corrosion resistant

APPLICATIONS:
Recommended for Residential.
Recommended for gates up to 14 feet in
length and 400 lbs. each.
SPECIAL APPLICATIONS:
Can be used in push to open or pull to open applications. This
permits the choice of having the actuator inside or outside the gate
regardless of hinge left or right. Direct drive system attaches directly
to the gate.
OPEN OR CLOSE CYCLE TIME:
Each direction, 15 seconds.
BATTERY/ CONTROL PANEL BOX:
18 (46cm) x 18 (46cm) x 8 (20cm) Powder Coated Black,
Weather resistant NEMA 3R.
ACTUATOR:
Rust Proof linear, acme screw drive; self-lubricating gears. Supplied
with 8 ft. (2.4m) of cable. Externally adjustable limit switches.
SHIPPING INFORMATION:
2 boxes, 64 lbs. (29 kg)

GENERAL DESCRIPTION:
Apollo swing and slide gate operators are ready for installation upon
receipt. A professional installer is recommended. Some welding is
required for proper installation.

CIRCUIT BOARD:
The advanced 1050 board is compatible with all 12 V and 24 V NiceApollo products. Great innovative functions for the maximum convenience and safety: the integrated control unit offers several features such as 7 day programmable timer, Programmable Inputs and Outputs. Master/slave management: it controls and synchronizes the movement of two motors for dual applications. Safe: speed, force, sensitivity to obstacles which distinguishes impact vs dragging force, position of the gate and other parameters can be adjusted according to specific installation conditions. Reliable: a battery back-up system guarantees continued operation during power outages. Solar power compatible: built-in regulated charging for up to a 30 W panel. Simple: the large LCD display with menus makes programming and controlling the system easy and trouble-free. Upgrade your current operator’s control board or purchase a new gate operator with the 1050 pre-installed.

WARRANTY:
All Apollo Gate Operators have a two-year limited warranty against
manufacturing defects.